蚂蚁彩票

蚂蚁彩票

当前位置: 首页 > 新闻资讯 > 公司新闻 > 正文

精轧螺纹钢筋的相关概念!

添加时间:2019-04-03      发布人:

提到螺纹钢筋很多人都不生疏,但是要提到精轧螺纹钢那还真是有很多人都不晓得的,其实精轧螺纹钢筋就是一种特殊外形带有不连续的外螺纹的直条钢筋,该钢筋在恣意截面处,都是能够带有内螺纹的衔接器或者锚具停止衔接或者锚固。而预应力混凝土用螺纹钢筋也是被称为精轧螺纹钢筋。
  Many people are not familiar with thread reinforcement, but many people do not know about it. In fact, finish-rolled thread reinforcement is a kind of straight steel bar with discontinuous external threads in a special shape. At arbitrary section, the steel bar is able to stop connection or anchorage with internal threads. The threaded steel bar used in prestressing concrete is also known as the finely rolled threaded steel bar.
  预应力混凝土用螺纹钢筋以屈从强度划分级别,其代号为“PSB加上规则屈从强度最小值表示。P、S、B分别为Prestressing、Scres-thread、Bars的英文首位字母”在订货的合同至少应该包括下列的内容,一方面是本规范编号,产品称号、产品强度等级代号,规格及重量,以及特殊请求。
  Prestressed concrete is classified by the yield strength of threaded steel bars, which is coded as "PSB plus the minimum regular yield strength". P, S and B are the first letters of Prestressing, Scres-thread and Bars respectively. The contract for ordering should include at least the following contents. On the one hand, it is the code number, product title, product strength grade code, specification and weight, as well as special requirements.
  关于精轧螺纹钢筋的允许偏向,钢筋通常按定尺长度交货,详细交货长度也应该在合同中注明,能够依照需方请求长度停止锯切再加工,钢筋按定尺或者被尺长度交货的时分,长度允许偏向为0~+50mm。关于再加工钢筋长度允许偏向为0~+20mm。钢筋的弯曲度也是不得影响正常的运用,钢筋每米弯曲度不应该大于4mm,总弯曲度不大于钢筋总长度的0.4%,钢筋的端部应该平齐,不影响衔接器经过。
济南钢筋批发
  As for the allowable deviation of finely rolled threaded steel bars, the steel bars are usually delivered according to the fixed length. The detailed delivery length should also be specified in the contract. Sawing and reprocessing can be stopped according to the length requested by the demander. When the steel bars are delivered according to the fixed length or by the length of the ruled bar, the allowable deviation of the length is 0-50 mm. The allowable deviation of the length of the reprocessed steel bar is from 0 to + 20 mm. The bending degree of reinforcing bars should not affect the normal operation. The bending degree of reinforcing bars per meter should not be greater than 4 mm, and the total bending degree should not be greater than 0.4% of the total length of reinforcing bars. The end of reinforcing bars should be even, without affecting the passing of connectors.
  精轧螺纹钢筋的牌号以及化学成分,钢筋钢的熔炼剖析中,硫、磷的含量不大于0.040%,消费厂也应该停止化学成分和合金元素的选择和应用,以保证经过不同办法加工的废品钢筋能满足相关的力学性能请求。冶炼的办法也是钢以氧气转炉或者电炉冶炼。而交货状态,钢筋以热轧状态、轧后余热处置状态或者热处置状态按直条交货。
  The grade and chemical composition of the finely rolled rebar and the content of sulphur and phosphorus in the melting analysis of the rebar steel are not more than 0.040%. Consumer factories should also stop the selection and application of chemical composition and alloy elements to ensure that the waste rebar processed by different methods can meet the relevant mechanical properties requirements. Steel is also smelted in oxygen converters or electric furnaces. In the delivery state, steel bars are delivered in straight strip in hot rolling state, waste heat disposal state or heat disposal state after rolling.
  以上也就是我们关于精轧螺纹钢筋的相关理论学问的引见,后期还是有愈加全面的相关学问推出,希望对各位人士也有一定的协助。
  Above is our introduction to the relevant theoretical knowledge of finely rolled rebar. Later, there will be more comprehensive introduction of relevant knowledge. I hope to give you some assistance.
上一条: 圆钢和螺纹钢的不同讲解!
下一条: 回顾三月份钢材行情是怎么样的?
咨询热线: 13605413762
友情链接:百分百彩票网  博发彩票  鸿运彩票平台  千禧彩票官网  博发彩票官网  长江彩票官网  千禧彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!